|
Problem IC67788
|
Status: Closed |
INTERACTIVE DB2TOP HADR SCREEN DOES NOT DISPLAY MILLISECONDS (MS) AFTER THE VALUE FOR LOG WTIME |
| product: |
DB2 FOR LUW / DB2FORLUW / 980 - DB2 |
| Problem description: |
Measure of unit (milliseconds) is not displayed for Log wtime in
the interactive db2top HADR screen:
[\]11:11:41,refresh=2secs(0.062) HADR
Sun,part=[1/1],DB2HADR:SAMPLE
[d=Y,a=N,e=N,p=ALL]
[qp=off]
Role......: Standby Status....: Connected
Time......: 2009/10/09 13:46:25 State.....: Peer
Mode......: Near synchronous Log gap...: 0
Heartbeat.: 0 Timeout...: 30
Log Writes: 38531 Log IOs...: 38531
Log Buff..: 0 Log wtime.: 4.93
Rf type...: Database Rf status.: Redo
Rf tms....: 2009/11/13 05:08:43 |
| Problem Summary: |
****************************************************************
* USERS AFFECTED: *
* ALL *
****************************************************************
* PROBLEM DESCRIPTION: *
* See Problem Description above. *
****************************************************************
* RECOMMENDATION: *
* Upgrade to DB2 Version 9.8 Fix Pack 4. *
**************************************************************** |
| Local Fix: |
|
| available fix packs: |
DB2 Version 9.8 Fix Pack 4 for AIX and Linux
DB2 Version 9.8 Fix Pack 5 for AIX and Linux
|
| Solution |
First fixed in DB2 Version 9.8 Fix Pack 4. |
| Workaround |
not known / see Local fix |
| Timestamps |
Date - problem reported :
Date - problem closed :
Date - last modified :
| 12.04.2010
05.08.2011
05.08.2011 |
| Problem solved at the following versions (IBM BugInfos) |
9.8.FP4
|
| Problem solved according to the fixlist(s) of the following version(s) |
| 9.8.0.4
|
 |
