|
Problem IT08141
|
Status: Closed |
The "num_sessions" value passed by DB2 to the vendor API SQLUVINT() with the LOAD WITH COPY YES command is always "0" |
| product: |
DB2 FOR LUW / DB2FORLUW / 970 - DB2 |
| Problem description: |
When trying to setup a backup vendor product for DB2 backups,
the "NUM_SESSIONS" value passed by DB2 to the vendor API
SQLUVINT() with the "LOAD WITH COPY YES" command is always "0"
regardless of number of sessions passed.
Example of a LOAD command with 3 sessions to be used with the
vendor product:
db2 load from .\test.dat of DEL insert into Table1 copy yes LOAD
"c:\temp\libnsrdb2.dll" open 3 sessions
However when checking the number of sessions passed by DB2 to
the vendor API, the output shows 0 for the "num_sessions"
parameter:
num_sessions=0 |
| Problem Summary: |
****************************************************************
* USERS AFFECTED: *
* Users who use LOAD COPY YES with vendor library. *
****************************************************************
* PROBLEM DESCRIPTION: *
* See Error Description *
****************************************************************
* RECOMMENDATION: *
* Upgrade to DB2 for LUW Version 9.7 FixPack 11 or higher. *
**************************************************************** |
| Local Fix: |
|
| Solution |
Firstly fixed in DB2 for LUW Version 9.7 FixPack 11. |
| Workaround |
not known / see Local fix |
| Timestamps |
Date - problem reported :
Date - problem closed :
Date - last modified :
| 06.04.2015
15.10.2015
15.10.2015 |
| Problem solved at the following versions (IBM BugInfos) |
9.7.FP11
|
| Problem solved according to the fixlist(s) of the following version(s) |
| 9.7.0.11
|
 |
